[msh] 2006-10-14

The alloy is configured as per the screenshots. Note that the management vlan
is set to 4.

In case we eventually might get SFP things, ports 23/24 have been left
the same as other ports, and 1/2 have been used for mgmt/trunking.

Port 1 - not tagged, vlan 4 by default, 192.168.1.1 is mgmt.
Port 2 - tagged, vlan 4 "by default" doesn't seem to work. use this for
         madako's trunk.

If more trunks are required, leave port 1 alone and give some more ports
like port 3 perhaps, since then there's always a plain non-trunk working
management port (1).

Other than that, the upper odd ports are for machineroom, lower even
ports are for clubroom.